Hi Limits Single pole rated at 25 amps with temperature rating set at 121F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater.
This is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace bad hi limit with a new one.
|Bulb Diameter ||5/16" |
|Bulb Length ||2-3/4" |
|Capillary Length ||18" |
|Pole/Throw ||Single Pole Single Throw (spst) |
|Hi-Limit Amperage ||25A|