This is how it should be wired for 110 volts, it comes pre-wired at 230 volt
Line Voltage and yellow w/black stripe on terminal #1
Red terminal #4
Orange and brown wire on terminal #5 (move the connected white wire to #6)
Line Neutral and yellow to #6 and white wire moved from #5
Thru Bolt motors are identified by their welded base and the four bolts that run the full length of the motor and fasten to the legs of the wet-end. The heads of these bolts are 1/4 drive.
to see all 48 and 56 frame motors we stock