Chlorine Supplies Starter Kit

Description

Used to start-up, sanitize and maintain the spa

Benefits:

Sanitization
Water Clarity
Balanced Water Chemistry

Warning:

Never add chlorine to a bromine spa, as it could cause an unsafe water condition.

Each Chlorine Supplies Starter Kit includes:

Sanitizer, Leisuretime, Spa56, Chlorine Granules, 2lb Container
Test Strips, Leisure Time, Chlorine/Bromine, pH, Alk, Calcium Hardness
Sanitizer, Advantis, Renew Non-Chlorine Shock, 2lb Granular
Scum Brick, Zorbie, Floating Scum Collector, For Spa
Spa Pre-Filter, Proline, Lasts up to 2,000 Gallons
Water Care, Leisure Time, Spa Defender, Scale Preventer, 1Qt Bottle
Water Care, Leisure Time, Spa Metal Gone, 1Pt Bottle
Sanitizer, Leisure Time, Spa Up, Balancer, 2lb Container
Sanitizer, Leisure Time, Spa Down, Balancer, Granular, 2.5lb Container
Water Clarifier, Leisure Time, Spa Scum Gon, Enzyme, 1Qt Bottle

How to use:

Read the Instructions: Start by carefully reading the instructions provided on your chemical supplies. Pay close attention to safety precautions and dosage recommendations.
Adjust pH Levels: Ensure the pH level of your pool or hot tub water is within the recommended range (usually 7.2 to 7.6). If it's not in the correct range, use pH increasers or decreasers as necessary.
Test Water Chemistry: Before adding any chlorine, it's essential to test your pool or hot tub's water chemistry. You can use test strips or a liquid test kit to measure parameters like pH, chlorine levels, and alkalinity.
Measure the Chlorine Granules: Consult the product label to determine the correct dosage of chlorine granules based on the spa's water volume and the desired chlorine level. Typically, you'll need 1-2 tablespoons of granules per 500 gallons of water to raise the chlorine level by 1 ppm.
Add Chlorine Granules: Carefully measure the required amount of chlorine granules and add them to the bucket of warm water. Always add the chemicals to the water, never the other way around. Stir the water to dissolve the granules thoroughly.
Wait and Recheck: Allow the spa's circulation system to run for at least 30 minutes to ensure proper mixing of the chlorine. Afterward, retest the water to verify that the chlorine level has reached the desired range. If necessary, repeat the process until the desired chlorine levels.
Additional Chemicals: Some starter kits may include other chemicals such as non-chlorine shock, metal removers, enzymes, and scale preventers. Follow the provided instructions if these are part of your kit.

Chlorine Supplies Starter Kit

Choose Options

Part Number:

Availability:

Related Items

Recently Viewed Items