The Gecko S-CLASS spa and hot tub control box has been used
by many spa manufacturers over the last several years. There are several configurations
available to operate any specific appliance you may have. Spacare.com is a leading
supplier of Gecko S-CLASS control boxes and we're here to help you find the right
control box for your hot tub!
In order to match your existing control box to one of the Gecko S-CLASS control
boxes below, we suggest that you locate the model and options code on your control
box. The model and options code is normally located on the back cover or right
side of the box. Match it as closely as possible to the model and options codes
you see below (You can also use the table below which describes what each S-CLASS
control box will operate). All Gecko S-CLASS control boxes come with a two
year warranty.
We support what we sell! If you have any questions about the S-CLASS system before
or after the sale, please do not hesitate to call us at 888-772-9887 or
email us at [email protected].
NOTE: Circuit boards are not available for S-CLASS systems. The complete control
box must be replaced.
A Cross Reference Guide To Replace Your Existing
SSPA/S-CLASS Gecko Control Box
| MODEL: SC-CF-P12-O-CP |
| OPTIONS: LH-H4.0-U-GE1 |
 |
VOLTAGE | HEATER KW | PUMP1 | PUMP2 | BLOWER | CIRC PUMP | OZONE | LIGHT |
| 120/240 | 1.5/4.0 120/240V | 2 spd 120/240V | N/A | N/A | 120/240V | 120/240V | 12V | |
|
Control Box with Heater Part #0202-205212 |
||||||||
|
Control Box with Heater and Topside Part #0202-205212-TS |
[Model Options Code Defined] | |||||||
| Compatible
Topside Controls: TSC-9, TSC-18 & TSC-19 |
| MODEL: SC-CF-P121-B1-01 |
| OPTIONS: LS-H4.0-AMP-XXX |
 |
VOLTAGE | HEATER KW | PUMP1 | PUMP2 | BLOWER | CIRC PUMP | OZONE | LIGHT |
| 120/240 | 1.5/4.0 120/240V | 2 spd 120/240V | 1 spd 120/240V | 120/240V* | N/A | 120/240V | 12V | |
|
Control Box with Heater Part #0202-207004 |
||||||||
|
Control Box with Heater and Topside Part #3-73-1500 or Part #3-73-2500 |
[Model Options Code Defined] | |||||||
| Compatible
Topside Controls: TSC-9, TSC-18 & TSC-19 |
| *May be used instead of a second pump. Cannot use a second pump and blower at the same time. |
| MODEL: SC-CF-1-P121-B1-01 |
| OPTIONS: LS-H4.0-JJC-XXX |
 |
VOLTAGE | HEATER KW | PUMP1 | PUMP2 | BLOWER | CIRC PUMP | OZONE | LIGHT |
| 120/240 | 1.5/4.0 120/240V | 2 spd 120/240V | 1 spd 120/240V | 120/240V* | N/A | 120/240V | 12V | |
|
Control Box with Heater Part #0202-207005 |
||||||||
|
Control Box with Heater and Topside Part #3-73-1000 or Part #3-73-2000 |
[Model Options Code Defined] | |||||||
| Compatible
Topside Controls: TSC-9, TSC-18 & TSC-19 |
| *May be used instead of a second pump. Cannot use a second pump and blower at the same time. |
| MODEL: SSPA-MP-P121-P211-B1-01 |
| OPTIONS: CP1-AU11-LS-H4.0-JJC-XXX |
 |
VOLTAGE | HEATER KW | PUMP1 | PUMP2 | BLOWER | CIRC PUMP | OZONE | LIGHT |
| 120/240 | 1.5/4.0 120/240V | 2 spd 120/240V | 1 spd 120/240V | 120/240V | 120/240V | 120/240V | 12V | |
|
Control Box with Heater Part #0202-205162 |
||||||||
| [Model Options Code Defined] | ||||||||
| Compatible
Topside Controls: TSC-9, TSC-18,TSC-19 & TSC-35* |
| *The TSC-35 topside will operate Pump1, Pump2 and a Blower by moving a jumper on the circuit board. |
| MODEL: SSPA-MP-P122-P212-B1-CP1-O1 |
| OPTIONS: AO11-H4.0-LCD-JJM-XXX |
|
|
VOLTAGE | HEATER KW | PUMP1 | PUMP2 | BLOWER | CIRC PUMP | OZONE | LIGHT |
| 120/240 | 1.5/4.0 120/240V | 2 spd 120/240V | 1 spd 120/240V | 120/240V | 120/240V | 120/240V | 12V | |
|
Control Box with Heater Part #0202-205160 |
||||||||
| [Model Options Code Defined] | ||||||||
| Compatible
Topside Control: TSC-8-GE2 |
| MODEL: SC-MP-P122-P212-B1-CP1-O1 |
| OPTIONS: LCD-H4.0-AMP-XXX |
 |
VOLTAGE | HEATER KW | PUMP1 | PUMP2 | BLOWER | CIRC PUMP | OZONE | LIGHT |
| 120/240 | 1.5/4.0 120/240V | 2 spd 120/240V | 1 spd 120/240V | 120/240V | 120/240V | 120/240V | 12V | |
|
Control Box with Heater Part #0202-205163 |
||||||||
| Used in HS Systems | [Model Options Code Defined] | |||||||
| Compatible
Topside Control: TSC-8-GE2 |
| MODEL: SC-MP-P122-P212-B1-01 |
| OPTIONS: CP1-AU11-LS-HR-U-JJC-XXX |
 |
VOLTAGE | HEATER KW | PUMP1 | PUMP2 | BLOWER | CIRC PUMP | OZONE | LIGHT |
| 120/240 | 1.5/4.0 120/240V | 2 spd 120/240V | 1 spd 120/240V | 120/240V | 120/240V | 120/240V | 12V | |
|
Control Box without Heater Part #0202-205209 |
||||||||
|
Heater Options: Part #C2400-0800ET or Part #C3236-1A |
[Model Options Code Defined] | |||||||
| Compatible
Topside Controls: TSC-9, TSC-18, TSC-19 & TSC-35* |
| *The TSC-35 topside will operate Pump1, Pump2 and a Blower by moving a jumper on the circuit board. |
| MODEL: SC-MP-P122-P212-P312-B1-01 | LA & Artesian Control Box (Excluding Heater) |
| OPTIONS:CP1-NE-LS-FB1-JJC-LA7 |
 |
VOLTAGE | HEATER KW | PUMP1 | PUMP2 | BLOWER | CIRC PUMP | OZONE | LIGHT |
| 120/240 | 1.5/4.0 120/240V | 2 spd 120/240V | 1 spd 120/240V | 120/240V* | 120/240V | 120/240V | 12V | |
|
Control Box without Heater (Plastic Box) Part #EL-655-34 |
||||||||
|
Heater Options: Part #C2400-0800ET or Part #C3236-1A |
[Model Options Code Defined] | |||||||
| Compatible
Topside Controls: K-44, K-72 or TSC-19 |
| *Or a third pump. Cannot operate a third pump and blower at the same time. |
| MODEL: SC-MP-P122-P212-P311-B1-01 | LA & Artesian Control Box (Excluding Heater) |
| OPTIONS: CP1-AU11-LS-U-JJC-NE |
 |
VOLTAGE | HEATER KW | PUMP1 | PUMP2 | BLOWER | CIRC PUMP | OZONE | LIGHT |
| 120/240 | 1.5/4.0 120/240V | 2 spd 120/240V | 1 spd 120/240V | 120/240V* | 120/240V | 120/240V | 12V | |
|
Control Box without Heater (Metal Box) Part #3-72-7107 |
||||||||
|
Heater Options: Part #C2400-0800ET or Part #C3236-1A |
[Model Options Code Defined] | |||||||
| *Or a third pump. Cannot operate a third pump and blower at the same time. |
