The Pump Is Coming On By Itself - No Buttons Were Pushed
The issue is most likely a faulty topside control.
Unplug it from the circuit board.
If the pump or any other device no longer comes on by itself, then the topside control is faulty and needs to be replaced.
When I Do Push A Selected Button, Something Else Comes On
The issue is most likely a faulty topside control by moisture entering the topside. The topside control will need to be replaced.
The Display Is Going Wacky And Some Of The Buttons Don't Respond
The issue is most likely a faulty topside control.
However, if the circuit board processor/EPROM or power driver is failing, then the issue could be a faulty circuit board.
The Spa Side Buttons Are Not Responding When I Push Them
The issue is most likely a faulty topside control. Make sure that a rodent has not chewed through the cable.
NOTE: When you unplug the topside control from the circuit board, the low speed/filter speed should come on in approximately one minute. If it does not, then either the pump or the circuit board is faulty. Be sure you have proper voltage to the control box from the house and that you also checked each fuse on the circuit board with a meter. Visual checks are not adequate.
Need assistance? We can be reached at [email protected]
