The natural alternative to chlorine (and bromine too!)
- Lasts four months
- Makes spas easy to manage, halogen-free
- Improves performance of ozone-equipped spas
- Assures an odor-free spa
- Significantly improves look & feel of water
- Simplifies water balance — it's unaffected by heat
- 9 out of 10 spa users prefer Nature2 over their old method
Specifications
- Capacity: for spas up to 1,000 gallons
- Run time: minimum 4 hours daily
- Flow rate: works with all spa flow rates
- Installation: Drops into the core of most spa filters, works with suction-side and pressure-side filters
Installation
CAUTION: Consult your spa owner's manual before opening your filter.
Step 1
Connect the support stems together and press onto main body to create a single device.
Step 2
Slide the entire device into the core of your existing spa filter cartridge. See examples that follow.
Open Top
Simply slide unit in from the top. Position near the top half of the cartridge. (Support stems may be cut to position the cartridge correctly.)
Open Top with Stand Pipe
Some spa filter systems are configured with a standpipe running the length of the filter core. Simply slide unit in from the top. Position near the top half of the cartridge for easy retrieval.
Closed Top
Simply slide unit in from the bottom. Position unit to rest on shelf inside filter core.
Note: When installed, the Spa Purifier must be at least 1" (2.5 cm) above the bottom of the filter to prevent blocking water flow.
The Company assumes no liabilities for the product if installed in any way other than the methods described above.
Nature2 Spa Test
Strips Keep your spa's water at its optimum levels—easily. Test the monopersulfate, alkalinity and pH levels just by swirling the Nature2 Test Strip.
Need assistance? We can be reached at [email protected]
