Nature2 Spa Recipe

Nature2 Spa Recipe

Click HERE to order Nature2

When:	What to do:
Purifier Start Up	Drain and refill your spa. Balance water per dealer guidelines. Add 1 teaspoon of dichlor to spa per 250 gallons (approx. 1000 litres). (Note: 1 teaspoon = 1/4 ounce = 7 grams.)
Every Day	Run spa according to recommendation supplied to you by the manufacturer of your spa
Before Each Use	Add 1 tablespoon of potassium peroxymonosulfate (MPS) to spa per 250 gallons (approx. 1000 litres) (Note: 1 tablespoon = 1 tablet = 3/4 ounce = 21 grams.) A convenient way to insure proper MPS level is to use a Nature² Spa Test Strip. If the Nature² Spa Test Strip indicates a low level of MPS, add 1 tablespoon of MPS to spa per 250 gallons and retest.
Once A Week	Add 3 tablespoons of potassium peroxymonosulfate to spa per 250 gallons (approx. 1000 litres). Check and adjust pH and total alkalinity. A convenient way to check pH and total, alkalinity levels is to use a Nature² Spa Test Strip.
Every 4 Months	Drain and refill your spa. Replace Nature² purifier, repeat purifier start-up.
As Needed	If water looks hazy, shock treat with 1 teaspoon of dichlor per 250 gallons (approx. 1000 litres)

Important
The Nature² Spa Purifier is not to be used with products containing bromine, sodium bromide or biguanides. If these products are being used, be sure to drain and refill spa with fresh water.

Note:

• As an alternative to potassium monopersulfate, dichlor may be substituted:
1 teaspoon dichlor = 3 tablespoons potassium peroxymonosulfate.

• The use of an efficient ozone generator with Nature² may reduce the need for supplemental chemical treatments.

* Potassium peroxymonosulfate may cause a lowering of the pH and total alkalinity of your spa water. Please monitor pH and total alkalinity at least once per week and adjust accordingly.