LX Circulation Pump 120 Volts 10-WE14-120

• Horsepower:                               1/40
• Voltage:                                       115v
• Amps:                                          1.6 A
• RPM:                                            2100
• Frame Size:                                 Specialty
• Pump Dimensions:                       9.84" L x 6.06" W x 6.42" H
• HZ Rating:                                    60HZ
• Intake Size:                                  1-1/2" MBT (Measures 2-7/16")
• Discharge Size:                            1-1/2" MBT (Measures 2-7/16")
• Flow Rate:                                    Max 40 GPM
• Cord Type:                                    4 Pin AMP
• Cord Length:                                 4'
• Max Head:                                    10.5 ft
• Max Pressure:                              50 PSI
• Max Temp:                                    140° F
• Single Speed
• Includes Unions & Cord O-Rings
• Does NOT Include Pump Cord

Important Installation Note: 

• Warranty is void if the pump runs dry.
• After filling the spa with water and BEFORE turning on the spa, loosen both unions on the pump until water starts to leak out. This will allow any trapped air to escape and prevent a "Dry Startup." 
• A Dry Startup will melt the area around the shaft seal, causing a leak.. See the picture in the provided images showing an example of this damage. 

Product Features:

• Compact and whisper quiet, less than 50db
• Built-in motor bracket for mounting in 5 different discharge angles
• Side Discharge for max flow
• Thermally Protected
• One Year Warranty